May 04, 2014

PET bottle plastic bottle controversy renewed antimony containing carcinogens

Recently, plastic bottles storm breaks out, said bottle PET ( polyester ) materials contain carcinogenic heavy metals antimony, many of whom are well-known brands , such as Coca-Cola, Niulanshan Erguotou , Fortune cooking oil and so on. The bottle HDPE ( high-density polyester ) and PP ( polypropylene ) material is not detected antimony .However , China Beverage Industry Association wrote that the detection method they used was not specified in the national standard method , while the published data did not identify the unit , not a scientific, not as a basis to determine whether the product is qualified . China Beverage Industry Association also pointed out that plastic food packaging containers used in the production of antimony catalyst production process has been widely used and recognized around the world , including China 's .For now, antimony remains in a plastic bottle in is real , but the antimony residues harmful to health if inconclusive , research institutions have also divergent views, this plasticizer incident just happened last time when liquor quite similar . According to the reporter , PET packaging its previous liquor plasticizer storm also broke clear plastic box the high temperatures will precipitate plasticizing agent . Studies have shown that , PET can heat to 70 , but the use of more than 10 months, it may be released DEHP and other plasticizers, plasticizers heating possibility undoubtedly also contribute to precipitation . In other words , antimony affected by factors such clear plastic box packaging as temperature and beverages nature , will slowly move to the costumes, drink bottles go .Antimony can irritate the eyes, nose , throat and skin , continuous exposure can damage the heart and liver function, inhalation of high levels of antimony and antimony can cause poisoning symptoms include vomiting, headaches, breathing difficulties , severe cases may die. While inhaling too much antimony contracted lung cancer cases has yet to appear, but not rule out the potential danger to the human body.September 2002 in accordance with the provisions of the World Health Organization , and the date of the antimony content in water intake should be less packaging boxes wholesale than 0.86 mg / kg per day . Japan limited PET bottle antimony content should be less than 200ppm, used for hot filling drinks , disable PET bottles containing antimony . EU regulations, the antimony content in food should be less than 20ppb, environmentally friendly PET fiber grade antimony content of not more than 260ppm.Experts, high temperature , acidic ( alkaline ) drinks, long term storage, these are the factors that promote the transfer of antimony from the packaging to the beverage . If the dress is acidic blister packs packaging substances, antimony easier to accelerate precipitation . To stay away plastic packaging box from " Antimony " harm , drink as much as possible PET packaging acidic ( alkaline ) beverages, while paying attention to choose from close to the production date , good storage conditions of the product . It should be noted , do not re-use PET bottle material is best not to install hot water, buy PET packaging after long-term storage and clam shells for sale do not drink , should be consumed as soon as possible .Technological processes and the overall management of the domestic beverage packaging companies are behind the rapid development of the food packaging industry , increased competition, raise standards , raw material price increases, profit making companies drastically reduced malpractice exposure management under external pressure. The scale of China 's beverage packaging business is uneven, the lack of effective monitoring of production quality , disorderly market competition significantly , leading to a continued decline in the profits of the entire industry .At present , the domestic beverage packaging business to import Japanese and Korean production equipment mainly due to the limitation of domestic machinery clamshell boxes investment scale and technical level , only at the secondary position , the majority of SMEs as the main target . Production environment is equally bleak , except for a twenty -renowned enterprises have built GMP workshop and waste water , waste gas treatment facilities outside most of the production workshop supporting imperfect .

Posted by: plasticpackaging at 06:09 AM | No Comments | Add Comment
Post contains 706 words, total size 5 kb.

PET plastic bottles containing carcinogens drink acidic beverages PET packaging

Recently, clear plastic box there are well-known plastic packaging box online media for Coca-Cola, Lee Kum Kee and other 12 brands of beverages and condiments plastic bottles were tested, the results showed that one of the nine PET ( polyester ) material bottle was found to contain carcinogenic heavy metals antimony, the remaining 3 PP ( polypropylene ) and HDPE ( high density polyethylene ) bottle material is not detected antimony .After detecting announced March 8 , China Beverage Industry Association responded that the detection method Sohu Health Channel UN [ microblogging ] home authority is not the method used by the national standards required , the data did not identify the unit simultaneously released without scientific, can not serve as a basis to determine whether the product is qualified .Experts advise: drink acidic beverages PET packagingYesterday , clamshell boxes an associate professor in charge of the detection of Clothing Technology Materials Science YAN Gong said in PET plastic material up to antimony residues , as in the synthesis of PET , antimony is commonly used catalysts. Thirty or forty years ago, we introduce Japanese technology , has been used up to now , but the extensive use of antimony harm is great, antimony can precipitate to beverages , especially acidic beverages such as cola easily dissolved heavy metals." In the test , we found that higher levels of antimony relatively inexpensive plastic bottles of branded products , of which blister packs packaging there may be a regeneration, the regeneration of secondary issues . Currently antimony content standards for beverage bottle is certainly not strictly , follow or the 1991 standard . " YAN Gong said," with the antimony catalyst for the production of PET material clear plastic box packaging as plastic bottles , effective and relatively inexpensive , since we disclose the results came out , the industry indeed have some impact , but the environmental point of view, we call on businesses should packaging boxes wholesale be made to improve technically and to reduce the use of antimony oxide as a catalyst , use titanium catalyst synthesis of PET. "According to reports, a carcinogenic effect of trivalent antimony , high temperature, acidic ( alkaline ) drinks, long term storage, these are favorable factors to promote the transfer of antimony from the packaging to the beverage . If the dress is acidic substances, antimony easier to accelerate precipitation . To stay away from " Antimony " harm , drink as much as possible PET packaging acidic ( alkaline ) beverages, while paying attention to choose from close to the production date , good storage conditions of the product .Dong Jinshi, food safety experts say , in the case of existing standards lag , qualified necessarily safe , consumers should keep your eyes open to see the fine print , note promising material bottles , PET material as buying less bottled drinks .In addition, YAN Gong introduced , recycling waste PET plastic bottles into the textile industry has more than 10 years , with six bottles of Coke will be able to do a chemical fiber garments .Antimony (Sb): toxic irritantAntimony atomic number 51 in the periodic table , is A metal element. Element symbol Sb. Silver-white lustrous metal hard and brittle . Toxic , the minimum lethal dose ( rats , intraperitoneal ) 100mg/kg. Irritation. Legend of Ancient Western had a lot of people trying to take stibnite clam shells for sale containing antimony to treat leprosy , the results of disease progression, one died .According to reports, antimony for human health depends on the cumulative amount is exceeded , and smoking , as it is harmful to long for people to figure out. Plastic bottles and clothing are daily contact with people , even if the product standard , the long run can not rule out the potential risks of antimony on the human body .When selecting PET plastic bottles, should be avoided as much as possible to buy PET packaging acidic foods ; while paying attention to select from the production date near, storage conditions are good products.

Posted by: plasticpackaging at 03:23 AM | No Comments | Add Comment
Post contains 688 words, total size 5 kb.

Functional packaging film to improve the packaging effect increase the added value

Is the thickness of the plastic film 0.25mm ( i.e. 250m) or less smooth and soft plastics , according to different purposes blister packs packaging , can be divided into packaging films , agricultural films, industrial films , medical film. Among them, functional packaging film developed rapidly in recent years , and more and more industry attention.Functional differences also called packaging film packaging film , means the film has no special features of the conventional film . Introduction of special features to make the effect of significantly improved packaging film , added value improved significantly , development and application of functional plastic packaging films are often able to get the social and economic benefit . Here are three varieties of functional plastic packaging film.Active barrier packaging filmsActive oxygen barrier packaging film is divided into different types and forms of suction -type barrier film .Type oxygen barrier packaging films and traditional barrier packaging films is different, it can not only effectively prevent oxygen through the membrane , and can remain in the oxygen absorbing plastic film bag , so that the oxygen in the bag is kept at a very low level , so as to effectively extend the shelf life of the product . In recent years, Japan and other industrialized countries, the industrial production of the film has been using to good effect.Type oxygen barrier packaging film is a composite film packaging material of an active layer ( oxygen-absorbing layer ) containing . After the film for packaging oxygen , residual oxygen into the packaging bag by heat-sealing layer oxygen layer , the oxygen in the active oxygen layer packaging material and a chemical reaction is consumed . Use oxygen film packaging food and other commodities, do not have in the bag when the package is loaded oxygen agent , simplifying the packaging process , and avoid eating consumers oxygen agents of the state.Oxygen-absorbing material may be reduced iron / sodium chloride , sodium sulfite , or ascorbic acid as a reactant , the product was blended into the resin , or the clear plastic box use of nylon MXD6 / cobalt salts, double polymer / salt -containing side cyclohexene packaging boxes wholesale the polymer blend of the chain / salt and other substances .Type oxygen barrier packaging films can also be blended into the polyolefin reactant oxygen obtained material which is interposed between the sealing layer and an adhesive layer , preparation of a separate layer of oxygen . Although this will increase the number of layers of the composite film , the manufacturing cost increase, but since the inner layer of the barrier layer , the oxygen absorption bag , will exhibit better results.Can Toyo produced a reduced iron and sodium chloride as the catalyst for the oxygen barrier resin blend type material that can be used to cooking bags , infusion packaging bags , containing vitamin C facial mask packaging bags. The determination of the oxygen absorption capacity of the sample film was 0.3ml/cm2, and oxygen absorption amount of the film by blending oxygen change control agent .Toyo canning company has also developed another active packaging film that suction -type barrier packaging film , the film in addition to a barrier outside, but also absorbs moisture film bag structure: the outer layer / active barrier layer / support layer / absorbent layer / inner layer . Application of the water-absorbing film drugs for clinical examination , powdered green tea, etc. , the function of the packaging material itself is hygroscopic , the application of the water-absorbing film does not have to be a desiccant such as silica gel or calcium chloride and loaded with the contents of the bag sealed.Japan shared printing company also successfully developed a hygroscopic packaging materials, is now developing applications in pharmaceuticals, electronic components and other packaging .Antimicrobial barrier filmAntibacterial nano technology and co-extruded cast process of combining , the development of antibacterial barrier packaging films, for extending the shelf life of food , showing good results , used in packing nut achieved good results.Antimicrobial barrier film structure is : PE40/AD10/EVOH20/AD10 / antibacterial PE40, a thickness of 120m. The film middle layer excellent barrier properties of EVOH resin , the resin is a very good barrier properties , can shield a special flavor and prevent mildew in storage during the betel nut ; inner polyethylene layer using antibacterial , antifungal enhancement effect, while it has good sealing performance , the operation provides good conditions bag ; ordinary polyethylene outer layer , in order to maintain a low cost.Antimicrobial barrier film produced by first dispersing agent aids the process of nano antibacterial agent, and then mixed with polyethylene , pelletized with a twin screw extruder to obtain an antibacterial master batch of polyethylene , polyethylene masterbatch with an antibacterial of the polyethylene resin mixed to obtain antimicrobial polyethylene pellets for co-extruded composite use.Betel nut product processed by special request product pure taste, aroma, traditional betel plastic composite packaging shelf life of about three months or so, antimicrobial barrier packaging shelf life of at least six months . The antimicrobial barrier film bag packaging costs have a greater advantage, cost plastic composite bag ( 64 g bags ) of 0.15 yuan / month, while the nano-antibacterial barrier bag approximately 0.11 yuan / month, to reduce costs by more than 25% . Practice shows that the antimicrobial barrier film for packing nut can not only greatly extend the shelf life of the product, reduce spoilage of goods , but also to reduce packaging costs . Antimicrobial barrier film is a worthy of further study , to promote clam shells for sale new products.VCI plastic filmAlso known as gasification of rust film , it is the film vapor corrosion inhibitor (VCI) mixed in polyethylene plastic film made ??of VCI .At room temperature , having a high vapor corrosion inhibitor molecules than air gasification , the release of molecules ( volatiles ) from the film into the closed package space. Once in contact with the vapor phase corrosion inhibitor of the metal surface of the package , i.e. its molecular moisture concentration was decomposed to form free ions dissolved in the electrolyte. Ions in the electrolyte reacts with the ions VCI , substituted molecules attached to the metal surface of the metal , the metal corrosion inhibiting electrochemical reaction occurs . The vapor phase corrosion inhibitor molecules evaporate slowly and gradually , so that space is always packaged in a " saturated " state, to achieve long-term stability of the rust.VCI has a polyethylene features: without salt clamshell boxes , corrosive gases, high temperatures , high humidity affect the outside layer of the product packaging VCI antirust film , you can play a powerful anti-rust function , rust effect is significant to overcome the traditional method is not sufficient to protect the product drawbacks , especially for metal , machinery and electronic products in the processing, storage, transportation and foreign import and export of sea products of high quality rust-proof requirements.VCI packaging applications when high efficiency . Available in bags , can also use tape, stapler and other simple sealing can be easily achieved rust , packaging automation ; provincial workers, save time , reduce costs and overall economic efficiency significantly . In addition, environmental protection and good , no oil , because oil will not cause serious pollution to the environment. Meanwhile, the long- time anti-rust , maritime protection up to 2 years , storage protection up to five years. Finally , VCI antirust film transparency is good , do not open the package you can see the status of the membrane of the object.As a rust-proof packaging , more traditional anti-rust process can be less five processes, reduce the amount of manpower and material resources VCI film. The traditional rust process: product Equipment rust on rust removing residual oil dry Packaging ??Transport open the package to the oil use . The VCI film rust process: product VCI film packaging ??Transport open the package to use.For the rust VCI film packaging with traditional packaging methods were compared using steel HT300 done a salt spray, humidity , indoor storage of the clear plastic box packaging three groups compared. Among them, the salt spray, humidity test , using VCI plastic film packaging steel later than oiled plastic film packaging rusty time ; stored indoors plastic packaging box , both of which are 180 days does not rust.Starting in 2001 , the domestic auto companies have adopted a VCI film packaging instead of the original packaging oiled proved using VCI film packaging has many advantages, including superior anti-corrosion effect , a good working environment , compared to comprehensive package of low cost , welcomed by users .Through three functional varieties of plastic packaging film presentation, we learned that not only broaden the functional film packaging film applications, and to achieve economic and social benefits double harvest.

Posted by: plasticpackaging at 03:23 AM | No Comments | Add Comment
Post contains 1489 words, total size 10 kb.

The new technology allows plastic chrome escalating

Plastics are widely used, are constantly updated and upgraded in use at the same time , of which there are chrome-plated clear plastic box packaging plastic , it 's a high quality surface finish with the metal surface to be comparable to its light weight , ease of processing and versatile features , prompting chrome plastics are widely used in the automotive industry, as well as a variety of industrial production and daily life products.In a typical chrome plastic processing , it is necessary to use chromium (HexavalentChromium) pretreatment of the surface of the plastic member in order to increase adhesion between the chromium and the plastic . Hexavalent plastic packaging box chromium materials are hazardous chemicals on the human body has a strong carcinogenic effect. Therefore , to find alternative materials hexavalent chrome plastic processing technology, became the subject of national science and technology research staff research .Union Seventh R & D Framework Programme (FP7) funded R & D projects supported ECOSAM team , using a new plastic polymer macromolecules own polymerization Nanotechnology (Molecular clam shells for sale Self-Assembly Nano Technology), do not use hexavalent chromium materials, and the development of chrome-plated plastic directly to complete a new process . The new technology not only ensures chrome plastic surface stability, security and adhesion , reduce the amount of chemical waste emissions generated during the original process ; and preclude the use of hexavalent chromium carcinogen materials packaging boxes wholesale , protection of workers , processors and the health of consumers , has important environmental and safety benefits .The new technology reduces the amount of use of expensive palladium catalyst and reduces the processing procedure , so that the plastic chrome overall processing cost of production decreased by 50 %. New chrome-plated plastic technology has broad application prospects clear plastic boxclamshell boxes , which will allow commercial operators, workers , consumers, and the environment and a wide range of blister packs packaging economic and social benefit .Society is progressive , plastic chemical industry is constantly upgrades and updates , and only know how to continue to progress and updates will not be someone else instead.

Posted by: plasticpackaging at 03:22 AM | No Comments | Add Comment
Post contains 362 words, total size 3 kb.

The next two to three years the development of plastic pipe will enter the "Golden Age"

The next two to three years clamshell boxes the development of plastic pipe will enter the "Golden Age"In recent years, driven by the rapid development of China's macro-economy, China's plastic pipe industry has packaging boxes wholesale been rapid development. Because plastic pipe has obvious advantages in energy, clear plastic box packaging land, water, materials aspects. 2015 development of the plastic packaging box plastic pipe will enter the clear plastic box "Golden Age", the total production will reach 13.2 million tons.Housing construction and public works still provide a stable domestic demand; conservancy construction policy support, an annual 400 clam shells for sale billion of investment; rural drinking water safety system upgrade construction blister packs packaging and building materials to the countryside pulling plastic pipe demand; gas supply system and heating consumption trends will also bring demand incremental and other conditions, by the current favorable policies, the development of China's plastic pipe industry unprecedented.Thus, the development of plastic pipe "golden era" has begun, I believe the future of China's plastic pipe industry will usher in rapid steady development.

Posted by: plasticpackaging at 03:22 AM | No Comments | Add Comment
Post contains 192 words, total size 2 kb.

Plastic products industry : the situation to pick up signs stable trend

According to the analysis , 2012 plastic ( 10445,75.00,0.72 % ) smooth processing industry overall situation of the economy , showed a warming trend .In terms of production and sales : in 2012 , China's industrial output and production of plastic products , steady sales value growth , was clamshell boxes warming trend . According to the National Bureau of Statistics data show that 1- December , plastics enterprises above designated size increased by a total industrial output value of 15.04% . Compared with the previous year , the growth rate dropped by 12.5 percentage points clam shells for sale , the growth rate is slowing down . Realize an annual sales value grew 14.95% , sales rate of 98.17% , higher than the 0.13 percent in 2011 , to continue to maintain a high level of sales rate . Production areas , 2012 to complete the production of plastic products increased by 8.99 percent . Agricultural film which grew 7.74% , an increase of 23.13 percent foam ; leather, synthetic leather rose 15.55 percent , an increase of 14.43 percent of household plastic , other plastics grew 7.26% , in addition to household plastic , leather, synthetic leather , foam plastics and last year clear plastic box grew more than 10 %, and other products rose varieties are less blister packs packaging than packaging boxes wholesale 10% , of which agricultural plastic film and other plastic products, the lowest growth rate , respectively, compared with the same period last year dropped by 6.75 and 21.33 percentage points.Import and export trade : the second half of 2012 , foreign trade clear plastic box packaging situation plastics industry to pick up signs . According to Customs statistics show that in January- December , the National Plastics export value growth of 16.55% over the previous year , of which export volume increase of 5.79% over the same period last year ; exports grew 24.55% , higher than the exports of China's foreign trade growth in 2012 (7.9% ) 16.65 percent, exports grew warmer. Exports accounted for about 23.91% over the same plastic packaging box period the country 's total output of plastic products , showing the importance of export markets in the entire industry. 2012 , China's plastic products basically meet the domestic market demand, resulting in plastic products import growth continued to decline . January-December , the National Plastics imports decreased by 3.46 percent than the same period last year ; imports fell by 0.46%.

Posted by: plasticpackaging at 03:21 AM | No Comments | Add Comment
Post contains 426 words, total size 3 kb.

April 30, 2014

Herman Miller Eames plastic chair fashion launch

For the modern American office furniture manufacturer Herman Miller (Herman Miller Inc.) And designers Charles and Ray Eames , it was first introduced in 1950 Eames molded fiberglass chair has become a representative symbol.However, this is based in Zeeland , Michigan, the company stopped production in 1989 because of concerns that the materials used will adversely affect the environment .Today, the company is re-launched Eames fiberglass chair , and using a new production process more environmentally friendly . It also started a recycling program , recycling the product .These chairs will go on sale this summer .Eames molded plastic armchair and armchair when first introduced , was the era of the first batch produced plastic chairs. Herman Miller uses in its design a variety of colors, highly selective , seat changes , and provides packaging boxes wholesale a cushion and cloth choice.The reason was discontinued in 1989 clear plastic box because of the company at that time that the first fiberglass production of " harmful to the environment , including the production process ... and the chairs scrapped ," the company said clamshell boxes in this year's June 10 press release .By 2009 , the company began offering based on the initial shape of the new version of the Eames clear plastic box packaging products , the use of the material is reinforced polypropylene .Herman Miller said , because of the emergence of a more sustainable development of the new glass , so you can re-launch of the Eames chair . The company has not released details, but said the new process uses a fiberglass reinforced dry bonding method , using dry polyester , so you do not have to plastic packaging box use the adhesive and thermal oxidizer . The company also used in the production of "no monomer resin ."The new recycling program in the United States will establish a nationwide network clam shells for sale , network companies will Eames fiberglass chairs the U.S. market for regeneration , but also in other parts of the company's global network opens up regeneration .Herman Miller Mirra modify another one called the office chair , although its popularity is not yet as Eames. Mirra office chair was blister packs packaging launched in 2003 , developed jointly by the company and the design community in Berlin Studio 7.5.

Posted by: plasticpackaging at 02:32 AM | Comments (3447) | Add Comment
Post contains 394 words, total size 3 kb.

Development path plastic gift packaging industry is still long way to go

Every Christmas, plastic gift packaging industry market conditions will always usher in a new upward trend. Businessmen in order to make it more attractive product appearance and taste , often in the packaging down the foot work . This is the main driving force pre- Christmas packaging materials market overall upward . Into June , around packaging materials Raw materials used in the production of enterprises have clam shells for sale received orders for the clear plastic box packaging Christmas period .In terms of production volume , production of all plastic packaging materials packaging materials production 1 /4. In value terms , the output value of plastic packaging materials accounted for 10 % of all packaging materials output. Cost -saving advantages of plastic packaging , self-evident. Plastic has been able to get more and more applications in the field of gift wrap , because plastic density, clear plastic box high strength , you can get a higher package yield, that is, " the quality of the packaging unit volume or package the size ." Secondly easy molding plastic molding consumption much lower than a metallic material such as steel . And the product has good transparency and ease of coloring, can satisfy various visual clamshell boxes effects on the appearance .Production of plastic packaging materials , has been ranked the world's first position. While encouraging the development of high speed , but in the environmental and ecological areas? At festivals , especially the Western Christmas , China's Spring Festival are all kinds of garbage generated peak . Just look at Christmas in June started packing material orders , we can imagine . Eco- environmental pressure to reduce plastic packaging waste festive seasons due to the most effective methods are: the use of large bottles , multi-use bio- plastics recycling. Promens plastics processors to promote large PET bottles , now offers capacities from 75ml to 500ml PET bottles for cosmetics. Small bottles for the launch of new products , a large blister packs packaging bottle of compliance with environmental requirements.Last month, the European Bioplastics Industry Association 's new president FrancoisdeBie noted that bio-plastics industry is facing an understanding and use of revolutionary edge . Bio- plastics industry average annual growth rate exceeding 20% in some applications developed rapidly .While the world of bio-based polymer production capacity ( 3.5 million tons / year ) of total capacity polymer only 2011 ( 235 million tons / year ) meager 1.5% share , manufacturers estimate that the end of the era of bio-based polymer production capacity plastic packaging box soared to approximately 12 million tons / year , which is when the 400 million tons / 3% of the total production in the polymer .Development path of China's plastic gift packaging industry remains to be done in the future we packaging boxes wholesale need to "be prepared " in how to improve the product quality and safety , how to enhance the value-added products , how to balance domestic and overseas markets, and recycling of materials under some other aspects effort to ensure the healthy development of sustainable plastic packaging materials industry.

Posted by: plasticpackaging at 02:31 AM | Comments (22) | Add Comment
Post contains 530 words, total size 4 kb.

Make plastic packaging for the food put on the " helmet"

As mainstream varieties of food packaging , plastic food packaging is playing an increasingly important role in ensuring food security, and improve the standard of food packaging materials is to protect itself safe and reliable important technical means.Plastic packaging for the food security escortChina Light Industry Information Center, the former race engineer Don Jane believes that food safety hazards are many factors , including the storage and sale of part , due to the lack of a better performance of packaging materials, refrigeration technology and food preservation techniques which lead to mildew rot is the most serious problem one of the factors . According to the report , so the loss of food in developing countries each year more than 50 % of total production , about 30% of each year 's grain, fruits and vegetables in the sales process due to rot and wasted . Plastic food packaging can not guarantee the safety of food , but also can greatly reduce waste and loss of food. Currently in total food consumption in packaging , plastic packaging than the sum of the amount of paper, metal , glass and packaging boxes wholesale other traditional packaging materials , accounting for more than 50 %. Therefore, any standard plastic packaging completely safe to use . For some false rumors in society, we should analyze the scientific attitude and judgment .Set standards to ensure the safety of the plastic bag materialPlastic packaging , while protecting food from outside contamination , there may introduce some sources . How to prevent the introduction of harmful substances in packaging materials in the production process, is an issue , assistant director of the National Food Safety Risk Assessment Center Wang Zhu days most concern. Wang Zhu day to emphasize that the plastic food packaging standards and regulations are plastic food packaging safety of a firewall. In the clamshell boxes field of food packaging materials , the clear plastic box packaging state -level law has strict requirements . Currently, the field of food safety , there are more than 200 standards related to food packaging materials ; addition to the standard , there are some departmental regulations also involves plastic food packaging materials. In these laws and regulations , for the resin used in food packaging , additives and other raw materials and dosage varieties have strict rules , as long as the production process in strict accordance with the relevant standards can guarantee the safety of plastic food packaging .Recycling for Sustainable DevelopmentWith plastic packaging materials widely used in food , plastic food packaging while ensuring food safety , is also facing the challenge how about let themselves achieve sustainable development. Plastics derived from petroleum , are non-renewable resources , and because of stable performance plastics , difficult to degrade themselves , thrown away after the formation of pollution on the environment , so how to dispose of waste plastics become a bottleneck restricting the healthy development of the plastic packaging industry.PS foam disposable tableware for the lifting of the ban after the "white pollution" Will comeback worry , Li Peisheng clear that the first cause of "white pollution" is not clam shells for sale the culprit PS foam disposable tableware itself but discard the bad habits and waste management poor ; secondly , Shanghai implementation of the " three cents project" prove recycling is the solution to the "white pollution" the most effective way ; again , the introduction of advanced recycling and disposal technologies developed also to solve the " white pollution" has provided technical support. Li Peisheng also revealed that the national authorities are developing new regulations , proposed waste lunch boxes, plastic bags , etc. into compulsory recycling directory . The implementation of these measures are discarded plastic food packaging will reduce environmental pollution and promote low-carbon industry , recycling and sustainable development play an important role .Equipment for the food security escortChina Light Industry Information Center, the former race engineer Don Jane believes that food safety hazards are many factors , including the storage and sale of part , due to the lack of clear plastic box a better performance of packaging materials, refrigeration technology and food preservation techniques which lead to mildew rot is the most serious problem one of the factors . According to the report , so the loss of food in blister packs packaging developing countries each year more than 50 % of total production , about 30% of each year 's grain, fruits and vegetables in the sales process due to rot and wasted . Plastic food packaging can not guarantee the safety of food , but also can greatly reduce waste and loss of food. Currently in total food consumption in packaging , plastic packaging than the sum of the amount of paper, metal , glass and other traditional packaging materials , accounting for more than 50 %.Set standards to ensure the safety of the plastic bag materialPlastic packaging plastic packaging box , while protecting food from outside contamination , there may introduce some sources . How to prevent the introduction of harmful substances in packaging materials in the production process, is an issue , assistant director of the National Food Safety Risk Assessment Center Wang Zhu days most concern. Wang Zhu day to emphasize that the plastic food packaging standards and regulations are plastic food packaging safety of a firewall. In the field of food packaging materials , the state -level law has strict requirements . Currently, the field of food safety , there are more than 200 standards related to food packaging materials ; addition to the standard , there are some departmental regulations also involves plastic food packaging materials. In these laws and regulations , for the resin used in food packaging , additives and other raw materials and dosage varieties have strict rules , as long as the production process in strict accordance with the relevant standards can guarantee the safety of plastic food packaging .

Posted by: plasticpackaging at 02:30 AM | Comments (45) | Add Comment
Post contains 1005 words, total size 7 kb.

TPE plastic top medical industry standards to ensure product quality requirements

Committed to the development of thermoplastic elastomer material, production packaging boxes wholesale and sale of plastic on top of Dongguan clam shells for sale CHINAPLAS2013 Chinaplas interviewed. Wang Fang, vice president of research and development that the company products are mainly for clear plastic box the high-end clamshell boxes market, while the company has always been to the medical industry standards to themselves, to strengthen quality control of raw materials to ensure clear plastic box packaging product quality.The products on display, Fang said, is blister packs packaging divided into industrial thermoplastic elastomers, thermoplastic elastomers for medical plastic packaging box use, flame retardant thermoplastic elastomer and dynamically vulcanized rubber (TPV). Compared with conventional PVC materials, these products do not contain halogens and heavy metals, no harm to humans and the environment.

Posted by: plasticpackaging at 02:30 AM | Comments (432) | Add Comment
Post contains 141 words, total size 1 kb.

Significant increase in the production of plastic products

According to the National Bureau of Statistics released the latest data in May, clear plastic box European macro frequent good news, China's clam shells for sale exports of 815,900 tons of plastic products, the chain increased 6.26%, up 2.24%, clear plastic box packaging to a certain extent, stimulating the clamshell boxes growth of packaging boxes wholesale China's plastics production.Currently, the film demand season ended, films demand is not open, the market is in a demand gap. May plastics production was 5.116 million tons, an increase of 1.79%, rose 7.1% year on year growth for three consecutive months, picked up. CBI Research Center, believes that increased export-led recovery in the production of plastic products. June, as the plastic packaging box weather turns hot, packaging demand will be improved, exports will also steadily, plastic products production will slightly increase. As the weather turns hot, the blister packs packaging demand for beverage packaging will increase, but companies purchase more cautious.

Posted by: plasticpackaging at 02:29 AM | Comments (554) | Add Comment
Post contains 165 words, total size 1 kb.

April 29, 2014

News Express : European advocates of renewable thermoformed PET trays alone

Headquartered in Brussels, Belgium Plastics Recyclers Europe trade group called for clamshell boxes the establishment of an independent regeneration flow through a joint program of PET thermoformed trays .The organization says , PET tray is a valuable secondary raw materials need to be clear plastic box separated sorting PET bottles .Chairman of the organization Casper van den Dungen said in a press release : " trays and bottles are two different types of products , can not be regenerated in the same production line in its design and chemical composition are not the same , it might give existing . PET recycling bring quality problems . "Currently recycling system implemented in Europe did not packaging boxes wholesale separate out the clam shells for sale PET tray , the tray is used for this kind of fresh food packaging applications.Van den Dungen said: "The recycling system and sorting centers can not put this issue to push down the value blister packs packaging chain ."The organization said that the annual consumption of 700,000 tons to Europe PET tray. As long as they clear plastic box packaging can be properly separated from the other waste streams ( such as PET bottle or a polyolefin ) out , the trays can be used as a valuable secondary raw material for the regeneration and reuse.The organization also said that separate recycling plastic packaging box will encourage enterprises to invest in additional tray for recycled PET production line . This will help to improve resource efficiency in Europe.

Posted by: plasticpackaging at 03:51 AM | Comments (1483) | Add Comment
Post contains 263 words, total size 2 kb.

Analysis of environment-friendly plastic tableware sales

Because plastic products have been deep into every aspect of our lives , so the number of waste plastics is also growing rapidly ; reported that China has become the world's largest waste plastics market countries , but also the largest country in the world imports of waste plastics . However, in terms of waste plastic recycling , China is still in its infancy, low utilization of waste plastics recycling , waste plastics and packaging recycling rate of less than 10 % of waste plastics recycling industry difficult.The main difficulty faced includes three aspects :One policy, waste plastics recycling can effectively reduce energy blister packs packaging consumption and environmental pollution , but not at the macro level of waste plastic recycling integrated planning and development of the industry, the lack of specific policy support , the lack of plastic waste classification norms, lack of the procurement and use of waste plastics business to meet product clear plastic box safety requirements identification and encouragement. Related systems, and these have led to the recycling of waste plastics industry has long showed a fluctuating condition .Second, technology, international , plastic recycling methods are physical regeneration, energy recovery , chemical reduction , and used as a solid fuel. At present, China's plastic recycling is mainly oriented to the physical regeneration . The vast majority of waste plastics packaging boxes wholesale recycling processing enterprises basically no condition to introduce and develop new technologies, new processes , new equipment is low , product technology content and added value , thus impeding the development of waste plastics recycling process .Third, the management, it is understood that the current waste plastics industry is jointly managed by clear plastic box packaging the Ministry of Environmental Protection , the National Development and Reform Commission , Ministry of Commerce , General Administration of Customs General Administration of Quality Supervision, Inspection and so clam shells for sale on. clamshell boxes Because the plastic packaging box industry focal point is not clear, resulting in a lack of industry guidance , technical specifications. So as soon as possible to establish centralized departments , garbage separation and recycling will work closely with them in order to establish a recycling system of the whole society .

Posted by: plasticpackaging at 03:50 AM | Comments (1562) | Add Comment
Post contains 376 words, total size 3 kb.

High quality PVC plastic pipe products will become the mainstream industry

Plastic pipe industry needs to improve the quality of productsFirst, by the end of 2010 we achieved 840 million tonnes , while in 2011 we achieved a yield of close to 10 million tons , more than the world can be said to amount to 2/ 5. This data illustrates the recent developments in our industry in terms of sales , production levels , product quality and technical level , have been very good improvement and development. With further broaden the application areas , the entire backbone enterprises , product quality and brand awareness are gradually improving in the market of plastic pipes and other pipes compared with greater pace of development, so as packaging boxes wholesale to gradually standardize the Chinese market clear plastic box packaging high quality plastic pipe will become the market mainstream products.PVC pipe applications adhere to energy saving extensionSecond , according to the "Twelfth Five Year Plan" related content, but also China pipe industry polyethylene pipe, PVC pipe ene -based, application support and improve the quality assurance system as soon as possible , steadily building to improve the town , under the premise of water and other aspects of the relevant market , and actively explore the plastic pipe applications in other fields. And for which the "Twelfth Five Year Plan" period of a development goal , we will begin publishing in May of this year , but here I will tell you that China plastic pipe will be more than 10% of the speed of development , in addition we also hope that the "five " after the country reached 12 million tons of plastic pipe , it means the use of plastic pipe will reach 60% in the country's use of blister packs packaging the pipeline , from the other side also shows that in terms of plastic pipes will be the largest species within the pipeline industry . Our main job is to continue to increase during this period of product innovation , improve supporting this technology , industry, product structure adjustment , and further increase product innovation ; another complete set of products we want to achieve and strengthen inspection well in terms of pipe valves development and promotion efforts ; more important is that we want to increase marketing to make further use of plastic pipes in other areas ; then we will continue to adhere to energy conservation industry , because the plastic pipes in energy conservation contribution is very large, especially in water, land , materials and other aspects of the festival name of the country to make a significant contribution to economic development . So we want to take advantage of this to improve our level and technical aspects , resulting in greater promotion, which is a few simple things to do during the 125 's plastic pipe industry .Potential plastic pipe market prospectsThird, according to some relevant market introduction, the number of people who clam shells for sale are on the pipe industry market has some concerns. Here I introduce some aspects of the market are not consistent : the first is water conservancy, agriculture in our country attaches great importance to the construction of water conservancy , water conservancy from the National Planning Conference in February number ten revealing information that China planned water industry 5 125 in estimating the total investment 1.8 trillion , of which the central investment is 8000000000000000 , supporting local investment over ten thousand billion respectively. Thus pipeline capacity should be said that the market reached 2000 million , the average annual market capacity is down to 400 million . It is well known from a number of agencies policies can be seen in this market continue to increase the amount invested , that is, the market will be more and more to the industry 's front companies, brands good business, good quality companies to tilt ; second is the construction industry, including engineering, construction market town , in addition to the real estate we have a large number of construction tasks, you can also say the pipeline industry development focus areas of the world use Feng pipeline , the construction of our country summarizes the Twelfth Five-Year Business plan completed construction on ten billion square meters of residential construction , the pull of 6% of gross national economic production in 2011 reached 6.6% , such a large proportion of the Chinese government is not going to give up. So in the future for a long time , it is clear plastic box necessary to adhere to , and now in the coordinated development of the country , while five-year plan is also a critical plastic packaging box period of building a moderately prosperous society , as China's industrialization, informatization , urbanization, marketization and internationalization in-depth development, basic construction scale will continue to grow , to end five-year plan , the government hopes the construction industry grew by 15% , which means that the building will not only not decreased growth . Other aspects, one is the various areas of town pipes, drains , etc. We are working in clamshell boxes a large increase .The above information indicates that the outlook for the various plastic pipe development is very good, I believe PVC plastic pipe market will have good prospects !

Posted by: plasticpackaging at 03:50 AM | Comments (2417) | Add Comment
Post contains 892 words, total size 6 kb.

The first half of 2013 the Russian plastics production rose 10%

According to MRC analysts said , from January to June this year , the main products of polymer production in Russia rose by 10%.Since clear plastic box packaging May 2013 , the upward trend has slowed. June , polymer pipes, hoses and doors , box production declined year on year . However , in the first half of this year compared to last year, the total output of polymer products is still up 10%.According to the Russian Federal State Statistics Service , June yield nonporous film and sheet for 73,200 tons , up clamshell boxes 2.2 percent compared to May . In the first half of plastic packaging box 2013 , the total output of 403,000 tons of products , rose 2.2%.June , plastic tubing, hose and pipe fittings production was 53,700 tonnes , up 4.3 percent compared to May . In June last year , production was 72,600 tonnes. Overall, from January to June 2013 , total production of these products is 276,500 tons , down 7.2%.Production of plastic sheets and sheets for 16,500 tons , up 16.8 percent compared to May . In the first half of this year, these products production was 93,800 clear plastic box tons , an increase of 17.2%.Production of plastic windows and plastic sill plate is 2.6 million square meters , up 9.3 percent compared to May . January to June this year, the total production of these products is 10.9 million blister packs packaging square meters , an increase of 9.7%.Plastic doors and plastic boxes per month to 89,900 square meters, up 17.6 percent compared to May . June 2012 , the Russian plastic doors and plastic containers production is 98,700 square meters. January to June 2013 , total production of packaging boxes wholesale these products 396,4000 square meters , an clam shells for sale increase of 0.5%.In June, production of plastic bottles, flasks and other bottles of 1.3 billion , essentially flat with May . January to June this year, the total production of these products 7 billion , down 3.9%.

Posted by: plasticpackaging at 03:49 AM | Comments (925) | Add Comment
Post contains 351 words, total size 2 kb.

Plastic productsproduction willincreaseslightly

According to the NationalBureau of Statisticsreleased the latestdata, China'sMayproduction clear plastic box was5.116 million tonsof plastic products, an increaseof 1.79%, rose7.1%year on year growthfor plastic packaging box three consecutivemonths,picked up.CBIResearch Center,believes thatincreasedexport-ledrecovery intheproduction of plastic packaging boxes wholesaleclear plastic box packaging products.June,as the clamshell boxes weather turnshot,packagingdemandwill be improved,exports willalsosteadily,plastic productsproduction willslightlyincrease.May, Europeanmacrofrequentgood news, China'sexports of815,900 tonsof plastic products, the chain increased6.26%, up2.24%, to a clam shells for sale certainextent,stimulating thegrowth of China'splasticsproduction.Currently, blister packs packaging thefilmdemand seasonended,filmsdemandis not open,the market is inademandgap.

Posted by: plasticpackaging at 03:49 AM | Comments (184) | Add Comment
Post contains 86 words, total size 1 kb.

April 18, 2014

Infusion bags will become the new hot spot

90% of our current infusion using glass bottles , soft plastic packaging actual production is less than 2 million bottles ( bags ) . Currently, most foreign infusion using high quality plastic bottles or plastic bags . With China's accession to WTO, foreign hospitals increased, the number of foreigners living in plastic trays China have continued to increase greatly increased demand . Developed using the infusion volume was 3.33 per bottle , this is a very large market space. The current global production of 12 billion infusion bottles, China only 30 million bottles plastic packaging . Therefore , since 2001, the clear plastic packaging renovation and expansion , the new infusion packaging production to become " hot spots" , the plastic packaging industry is no exception. Infusion package is divided into plastic bottles and plastic bags . BOPP bottle meteoric rise since 2003 , with the Dongguan Jia Hong Machinery Company to develop domestic BOPP infusion bottle manufacturing equipment , the use of two-step injection stretch blow PP bottle production equipment, production per hour 2200 ~ 2500 bottles , by the pharmaceutical plastic box industry users Welcome . And other sterilization, filling plastic packaging box equipment matching , BOPP infusion bottles showing growth , changing bottles domination . Existing and projected to 2005 in the construction of BOPP bottle production capacity ( there are 17 to introduce 20 plastic bottle production line ) will exceed one billion bottles , will together form a medicinal liquid packaging diversity and glass bottles, clear plastic box packaging soft plastic bags. Soft plastic , the According to incomplete statistics , at present, a total of 21 enterprises to introduce or enter plastic packaging design into soft plastic packaging production line 25 , soft plastic bag production capacity will reach 300 million bags. In summary , the current vac tray project is being launched packaging boxes wholesale or prepared on plastic packaging enterprises should seriously consider the implementation of access to medicine packaging system for packaging packaging design materials quality , technology has strict requirements . But ( plastic packaging box pharmaceutical plastic , plastic packaging materials and containers infusion standards ) has not been clamshell packaging introduced, in terms of quality assurance to the user to select the package materials create difficulties . Prone to disorderly competition . Therefore, we must clear plastic box consider carefully to avoid economic losses.Infusion bags will become the new hot spot?90% of our current infusion using glass bottles , soft plastic packaging actual production is less than 2 million bottles ( bags ) . Currently, most foreign infusion using high quality plastic bottles or plastic bags . With China's accession to WTO, foreign hospitals increased, the number of foreigners living in China have continued to increase greatly increased demand . Developed vac tray using the infusion volume was 3.33 per bottle , this is a very large market space. The current global production of 12 billion infusion bottles, China only 30 million bottles . Therefore , since 2001, the renovation and plastic packaging expansion , the plastic packaging design new infusion packaging production to clamshell packaging become " hot spots" , the plastic packaging industry is no exception. Infusion package is divided into plastic bottles and plastic bags . BOPP bottle meteoric rise since 2003 , clam shells for sale with the Dongguan Jia Hong Machinery Company to develop domestic BOPP infusion bottle manufacturing equipment , the use of two-step injection stretch blow PP bottle production equipment, production per hour 2200 ~ 2500 bottles , by the pharmaceutical industry users Welcome . And other sterilization, filling equipment matching , BOPP infusion bottles showing growth , changing bottles domination . Existing and clear plastic packaging projected to 2005 in the construction of BOPP bottle blister packs packaging production capacity ( there are clamshell boxes 17 to introduce 20 plastic bottle production line ) will exceed one billion bottles , will together form a medicinal liquid packaging diversity and glass bottles, soft plastic bags. Soft plastic , the According to incomplete statistics , at present, a total of 21 enterprises to introduce or enter into soft plastic packaging production line 25 , soft plastic bag production capacity will reach 300 million bags. In summary , the current project is being launched or prepared on plastic packaging enterprises should seriously consider the implementation of access to medicine packaging system for packaging materials quality , technology has strict requirements . But ( pharmaceutical plastic , plastic packaging materials plastic packaging box and containers infusion standards ) has not been introduced, in terms of quality packaging design assurance to plastic trays the user to select the package materials plastic box create difficulties . Prone to disorderly competition . Therefore, we must consider carefully to avoid economic losses.

Posted by: plasticpackaging at 02:50 AM | Comments (22) | Add Comment
Post contains 802 words, total size 6 kb.

Comparison of domestic and foreign pharmaceutical blister packaging

Blister packaging is one of the main forms of pharmaceutical packaging , the packaging industry practice known as PTP . With the domestic pharmaceutical industry continues to grow , PTP packaging has been to develop , by the end of 2002, to get a clear plastic packaging registration card PTP aluminum foil drug packaging production enterprises has reached 39 , with a total production capacity of over 400 tons , PTP product has come out country.PTP aluminum foil from the original double-sided or single-sided printing blank varieties , developed to Single Gold Series Gold Series double-sided , single-sided color series , two-sided color series , two-sided printing monochrome or multicolor overprint series of dozens of varieties, a hard PTP aluminum foil, aluminum foil PTP also soft ; development of domestic base into packaging design a bubble is gradually formed, PVC rigid sheet from the most widely used , the PVDC ( polyvinylidene chloride ) coated tablets, from composite PVC / PE ( polyethylene ) plastic sheet to cold forming aluminum composite sheets, so pharmaceutical packaging more optional.Comparative and future direction of foreign productsEuropean and American countries, pharmaceutical packaging has been the representative of the advanced level , regardless of their production, packaging equipment or PTP packaging materials, has formed a series , automation and functional. This paper compares different blister packaging products.1 , aluminum foil blister packagingPTP aluminum foil can be divided according to use touch broken aluminum foil , aluminum foil and peel peel - touch broken aluminum foil ; from a hard material of aluminum , soft aluminum , composite materials ; from the functional point with security foil , Child protection foil, aluminum foil child safety and convenience for the elderly , special protective foil and so on.Foil tactile broken : the most widely used aluminum foil cover may be rigid or may be soft , thickness of 15m to 30m, the basic structure of a protective layer / aluminum foil / heat seal layer, and PVC, PP ( polypropylene ), PET ( polyester ), PS ( polystyrene ) and PE ( polyethylene ) and other composite materials, sealing the blister cover , has a very good air tightness.Peel aluminum foil : aluminum foil peel airtight foil- break contact with essentially the same , the difference between the substrate and its heat seal strength is not too easy and only opened foil manufactured using a soft composite material, The basic structure plastic trays of the paper / PET / AL / sealing layer ; PET / AL / sealing layer ; paper / AL / sealing layer , the heat seal strength is no minimum value requirements , suitable for child-resistant packaging as well as those afraid of pressure packaging items.Peel - Touch broken aluminum foil : These packages are mainly used to protect children's safety , but also easy to open the elderly. Way is to peel open PET or paper / PET composite film of aluminum foil , and then touch the broken foil obtain drugs , the basic structure: Paper / PET / special glue / AL / sealing layer , PET / special glue / AL / sealing layer , the United States and Germany, most of blister packaging requires child-resistant packaging .Security Foil: In addition to positioning sided overprint bit outside foil , aluminum foil surface printing, coating , transfer of specific substances or machined aluminum foil itself a special form of PTP aluminum foil, aluminum foil is generally known as anti-counterfeiting , anti-counterfeiting printing ink can be divided into general laser holographic anti-counterfeiting , anti-counterfeiting labels and layout security , so that the interests of pharmaceutical companies get some protection .Special foil : These foil is mainly used for special items of packaging , not only can effectively protect the packaged goods covered , while the aluminum foil itself is not related substances corrode and damage the packaging of these related substances such as acids , alkalis, and easy and other plastic box volatiles . The basic structure of the protective layer / AL / special coating / sealing layer, a protective layer / AL / barrier layer / heat seal layer .Our PTP aluminum foil, pharmaceutical packaging in a form that is basically only touch broken aluminum foil , aluminum foil while counterfeit products do not diversify , special foil only packaging boxes wholesale a breakthrough in one or two areas , children's protective foil, convenient for the clamshell packaging elderly aluminum foil, and two face -bit positioning overlay foil , etc., is basically blank , requiring manufacturers to adapt to the plastic packaging design situation PTP , learn from foreign advanced technology and equipment to improve business processes , to keep up with PTP aluminum foil packaging trends, future PTP aluminum foil, the to develop multi-functional, diverse and environmentally friendly production direction .2 , blister packaging material into the bubbleIn our country is still widely used as a foaming PVC rigid sheet material today, Europe has in many ways to restrict or prohibit the use of PVC, PVC main reason is harmful to the environment and have an impact on , and PVC barrier is not very satisfactory abroad have to use more of the following material as a foam substrate and the production process of these materials is quite mature.PET: barrier properties, transparency , resistance to bacterial , preferably cold , better adaptability to processing , low toxicity , beneficial drugs protected preservation.PP: good transparency , good barrier properties , non-toxic , good processing adaptability, can be recycled .PE: good barrier properties , good transparency , non-toxic , processing and better adaptability , can be recycled .COC: first developed in Japan cyclic olefin copolymer -like , with very good sealing performance , but their easily broken , so often associated with PP composite in order to facilitate the shape remains , but also with ALCAR complex , COC can now majority heat on high performance molding equipment.ALCAR composites: the use of new materials by copolymerizing the homopolymer , the material does not adhere to the mold , the mold surface with or without coatings can be used, but a higher coefficient of friction, this would complicate the design of the mold . Some grades of ALCAR and material can be molded at the same PVC foaming conditions .Aluminum composite molding material : with high gas barrier, wet , light-blocking performance for blister packaging, can be almost completely protected against drugs , but only into the foam material without heating can die stamping materials , very suitable for light , air , wet -sensitive pharmaceutical packaging, the basic structure of: nylon ( or PP) / aluminum / PVC / (PP, PE, sealing coatings ) .In addition to the production of PVC, PVC / PVDC, PVC / PE, PVC / PE / PVC and other plastic composite molding materials and outside , for PP, PET, PE, COC, ALCAR and other materials are not manufactured or immature technology , and long-term molding materials containing PVC class , to the environment and humans will cause some damage , along with human -depth knowledge of environmental protection of their own health , environmental class , non-toxic foaming material will be developed and applied more broadly , China's relevant departments should attach great importance to these issues.Domestic pharmaceutical companies for packaging material requirementsAt present, the pharmaceutical industry for blister packaging material requirements , show the following trends:A completely effective protection. Ensure the validity of drugs , increasing the shelf life of drugs . 2 , anti-counterfeiting packaging uniqueness. Modern companies increasingly pay attention to protect their brand and diverse security products blister packaging materials , is more conducive to the performance of personalized pharmaceutical packaging . 3, OTC drug packaging adaptability. OTC packaging blister packaging display is to clear, clear, effective and easily available to patients , in accordance with the provisions of the Drug Administration Law , this requirement will continue to be displayed.4 , non-toxic and environmentally friendly packaging . This requirement will increase with more intense vac tray awareness , kits enterprises are constantly striving to improve production methods and application of new materials. 5 , serialized packaging requirements. Large pharmaceutical companies , will design one plastic packaging box or more series of packaging solutions for their many varieties , such requests are still pouring suggested that this is a manifestation of corporate culture and product protection conscious .Domestic blister plastic packaging packaging material should be how to clear plastic box packaging developIn fact it can be summed up in one sentence the problems we are facing : the weak and the market is not standardized restriction technology equipment . Equipment is a good product hardware manufacturing conditions , no advanced equipment and ancillary equipment , even the best technology products can not do anything ; technology is a good product must support conditions , no mature innovative technology, even the best equipment will not necessarily produce great products come ; certainly not a regulated market , good products and new product because of the many human factors , and prices are not properly promote the use of , so to solve the unity of the three is our drug packaging materials further way of development.Comparison of domestic and foreign pharmaceutical blister packaging?Blister packaging is one of the main forms of pharmaceutical packaging , the packaging industry practice known as PTP . With the domestic pharmaceutical industry continues to grow , PTP packaging has been to develop , by the end of 2002, to get a registration card PTP aluminum foil drug packaging production enterprises has reached 39 , with a total production capacity of over 400 tons , PTP product has come out country.PTP aluminum foil from the original double-sided or single-sided printing blank varieties , developed to Single Gold Series Gold Series plastic packaging design double-sided , single-sided color series , two-sided color series , two-sided printing monochrome or multicolor overprint series of dozens of varieties, a hard PTP aluminum foil, aluminum foil PTP also soft ; development of domestic base into a bubble is gradually formed, PVC rigid sheet from the most widely used , the PVDC ( polyvinylidene chloride ) coated tablets, from composite PVC / PE ( polyethylene ) plastic sheet to cold forming aluminum composite sheets, so pharmaceutical packaging more optional.Comparative and future direction of foreign productsEuropean and vac tray American countries, pharmaceutical packaging has been the representative of the advanced level , regardless of their production, packaging equipment or PTP packaging materials, has formed a series , automation and functional. This paper compares different blister packaging products.1 , aluminum foil blister packagingPTP aluminum foil can be divided according to use touch broken aluminum foil , aluminum foil and peel peel - touch broken aluminum foil ; from a hard material of aluminum , soft aluminum , composite materials ; from the functional point with security foil , Child protection foil, aluminum foil child safety and convenience for the elderly , special protective foil and so on.Foil tactile broken : the most widely used aluminum foil cover may be rigid or may be soft , thickness of 15m to 30m, the basic structure of a protective layer / aluminum foil / heat seal layer, and PVC, PP ( polypropylene ), PET ( polyester ), PS ( polystyrene ) and PE ( polyethylene clear plastic box ) and other composite materials, sealing the blister cover , has a very good air tightness.Peel aluminum foil : aluminum foil peel airtight foil- break contact with essentially the same , the difference between the substrate and its heat seal strength is not too easy and only opened foil manufactured using a soft composite material, The basic structure of the paper / PET / AL / sealing layer ; PET / AL packaging design / sealing layer ; paper / AL / sealing layer , the heat seal strength is no minimum value requirements , suitable for child-resistant packaging as well as those afraid of pressure packaging items.Peel - Touch broken aluminum foil : These packages are mainly used to protect children's safety , but also easy to open the elderly. Way is to peel open PET or paper / PET composite film of aluminum foil , and then touch the broken foil obtain drugs , the basic structure: Paper / PET / special glue / AL / sealing layer , PET / special glue / AL / sealing layer , the United States and Germany, most of blister packaging requires child-resistant packaging .Security Foil: In addition to positioning sided overprint bit outside foil , aluminum foil surface printing, coating , transfer of specific substances or machined aluminum foil itself a special form of PTP aluminum foil, aluminum foil is generally known as anti-counterfeiting , anti-counterfeiting printing ink can be divided into general laser holographic anti-counterfeiting , anti-counterfeiting labels plastic trays and layout security , so that the interests of pharmaceutical companies get some protection .Special foil : These foil is mainly used for special items of packaging , not only can effectively protect the packaged goods covered , while the aluminum foil itself is not related substances corrode and damage the packaging of these related substances such as acids , alkalis, and easy and other volatiles . The basic structure of the protective layer / AL / special coating / sealing layer, a protective layer / AL / barrier layer / heat seal layer .Our PTP aluminum foil, pharmaceutical packaging in a form that is basically only touch broken aluminum foil , aluminum foil while counterfeit products do not diversify , special foil only a breakthrough in one or two areas , children's protective foil, convenient for the elderly aluminum foil, and two face -bit positioning overlay foil , etc., is basically blank , requiring manufacturers to adapt to the situation PTP , learn from foreign advanced technology and equipment to improve business processes , to keep up with PTP aluminum foil packaging trends, future PTP aluminum foil, the to develop multi-functional, diverse and environmentally friendly production direction .2 , blister packaging material into the bubbleIn our country is still widely used as a foaming PVC rigid sheet material today, Europe has in many ways to restrict or prohibit the use of PVC, PVC main reason is harmful to the environment and have an impact on , and PVC barrier is not very satisfactory abroad have to use more of the following material as a foam substrate and the production process of these materials is quite mature.PET: barrier properties, transparency , resistance to bacterial , preferably cold , better adaptability to processing , low toxicity , beneficial drugs protected preservation.PP: good transparency , good barrier properties , non-toxic , good processing adaptability, can be recycled .PE: good barrier properties , good transparency , non-toxic , processing and clamshell boxes better adaptability , can be recycled .COC: first developed in Japan cyclic olefin copolymer -like , with very good sealing performance , but their easily broken , so often associated with PP composite in order to facilitate the shape remains , but also with ALCAR complex , COC can clam shells for sale now majority heat on high performance molding equipment.ALCAR composites: the use of new materials by copolymerizing the homopolymer , the material does not adhere to the mold , the mold surface with or without coatings can be used, but a higher coefficient of clear plastic packaging friction, this would complicate the design of the mold . Some grades of ALCAR and material can be molded at the same PVC foaming conditions .Aluminum composite molding material : with high gas barrier, wet , light-blocking performance for blister packaging, can be almost completely protected against drugs , plastic box but only into the foam material without heating can die stamping materials , very suitable for light , air , wet -sensitive pharmaceutical packaging, the basic structure of: nylon ( or PP) / aluminum / PVC / (PP, PE, clamshell packaging sealing coatings ) .In addition to the production of PVC, PVC / PVDC, PVC / PE, PVC / PE / PVC and other plastic composite molding materials and outside , for PP, PET, PE, COC, ALCAR and other materials are not manufactured or immature technology , and long-term molding materials containing PVC class , to the environment and humans will cause some damage , along with human -depth knowledge of environmental protection of their own health , environmental class , non-toxic foaming material will be developed and applied more broadly , China's relevant departments should attach great importance to these issues.Domestic pharmaceutical companies for packaging material requirementsAt present, the pharmaceutical industry for blister packaging material requirements , show the following trends:A completely effective protection. Ensure the validity of drugs , increasing the shelf life of drugs . 2 , anti-counterfeiting packaging uniqueness. Modern companies increasingly pay attention to protect their brand and diverse security products blister packaging materials , is more conducive blister packs packaging to the performance of personalized pharmaceutical packaging . 3, OTC drug packaging adaptability. OTC packaging blister packaging display is to clear, clear, effective plastic packaging box and easily available to patients , in accordance with the provisions of the Drug Administration Law , this requirement will continue to be displayed.4 , non-toxic and environmentally friendly packaging . This requirement will increase with more intense awareness , kits enterprises are constantly striving to improve production methods and application of new materials. 5 , serialized packaging requirements. Large pharmaceutical companies , will design one or more series of packaging solutions for their many varieties , such requests are still pouring suggested that this is a manifestation of corporate culture and product protection conscious .Domestic blister packaging material should be how to developIn fact it can be summed up in one sentence the problems we are facing : the weak and the market is not standardized restriction technology equipment . Equipment is a plastic packaging good product hardware manufacturing conditions , no advanced equipment plastic packaging box and ancillary equipment , even the best technology products can not do anything ; technology is a good product must support conditions , no mature innovative technology, even the best equipment will not necessarily produce great products come ; certainly not a regulated market , good products and new product because of the many human factors , and prices are not properly promote the use of , so to solve the unity of the three is our drug packaging materials further way of development.

Posted by: plasticpackaging at 02:50 AM | Comments (546) | Add Comment
Post contains 3092 words, total size 21 kb.

Prefilled syringe sterile plastic packaging

Although the glass as a drug packaging materials has existed for a long time , but it is not the only option. A high-tech plastic and the new design is the accuracy , pharmaceutical compatibility and barrier properties of the pharmaceutical packaging field to create a new standard.Schott forma vitrum is the world 's leading packaging manufacturers in the pharmaceutical industry . The company has developed a new generation of high-tech plastics . TopPac brands include a range of syringes and vials products that combine Schott advantage in the production and design as well as cyclic olefin copolymer from Ticona 's Topas superior performance. In late April of this year , at an international conference on Oberhausen , this new type of polymer and its potential applications to display .The new drug delivery solutions and diagnosticsDr. Klaus Holtzhauer Schott forma vitrum syringe production manager , explained that container made ??of plastic similar to glass for drug delivery and diagnostics provides a novel solution. They are the precision , drug compatibility and barrier properties of the pharmaceutical packaging field to create a new standard. TopPac transparent plastic container is made ??of borosilicate glass as a good alternative to the pharmaceutical packaging products.Glass injectable drugs is considered good packaging material. Nevertheless , in some cases the glass is not the best choice. For example , there is the risk of fragmentation of the emergency drugs . Market demands are constantly changing , the pharmaceutical industry is continually developing new drugs and, therefore, require a new type of packaging. This is a container for the pharmaceutical industry on the proposed newer, plastic packaging design more stringent requirements. Better compatibility , safe handling of toxic products , active ingredients, longer life , and ease of packaging innovation is a new challenge facing the pharmaceutical packaging industry . Schott has been working closely with pharmaceutical manufacturers to jointly develop a new container industry and to meet the needs of users .Dr. Holtzhauer know that injecting drug market is growing rapidly , in part due to the development of vaccines, drugs, and cosmetics heart disease , medical imaging , self-care and emergency medical services and other fields . As a result, security , user-friendly pharmaceutical packaging demand has greatly increased , especially in the syringe can be directly applied .Strengths in different areasTopPac in the following areas have many advantages:* Suitable solvent , for example, water for injections and the protein product formulation and high viscosity.* Meet the direct application of the syringe stringent industry requirements, you can ensure that drugs are not in contact with the environment , but does not react with drugs.* Vials and syringes prepared by the TopPac can be stored for many years in a small size , because this material to water vapor barrier ability is excellent.Syringes models ranging from 1ml ~ 50ml , but within the range of 1ml ~ 10ml of the more obvious advantages . Because of the flexible material is very good , Schott can provide many special properties , such as integrated Luer lock. TopPac product can be applied directly . After the container by injection molding in a clean room technology production , directly in the form of sterile packaging, sterilization and delivered directly to the client's clean room. Complete syringe device includes all the well-known manufacturers of rubber components can provide. Last year , TopPac syringe can be used for emergency treatment was introduced to Europe in heart patients . Specific research began in the late nineties plastic box Otto Schott Research Center Marienborn 's .CGMP production in accordance with the rulesThis product is currently produced mainly conducted in Switzerland Schott . The company is to produce such products established , and has passed the ISO 9001:2000 and ISO13485 ( medical products ) certified. Syringe production in accordance with cGMP regulations , and meet the standard in packaging design Europe, Japan and the U.S. pharmaceutical industry.Holzhauer told us , in order to meet the quality standards of products used directly , they transport from COC polymer to the factory from the moment on the entire production process strictly checked. Transmitted directly to the material of the injection molding apparatus . In the clean room production process, they are all production process parameters for detection and control , including the application of remote control camera on fully automated production lines adjusted to ensure high product quality.TopPac syringe to avoid the cost and time wasting process , such as cleaning and sterilization. The advantage of these costs on the polymer from the Schott developed aseptic production equipment. Since modern production techniques and the corresponding sterile injection molding apparatus , and other conditions of bacterial and particle- forming device is still open after good control . By optimizing the packing syringes and sterilized by radiation protection devices . Pharmaceutical company responsible for drug solution under sterile conditions to loaded into the syringe , the company received from the company Schott polymer to be used directly TopPac a sterile syringe and sent directly to the factory , so no cleaning or sterilization again.Topas COC tech polymer - another materialIf there is no high-performance polymers , the development of innovative applications in the medical field will not now so compelling. For example , the pharmaceutical packaging field is. Packaging must be able to effectively protect drugs meet stringent industry standards and without problems in the drug delivery process, while also cutting costs and customer satisfaction. To meet these demanding requirements , Ticona has developed a special polymer comprising Topas COC.Two different monomersPlastics from Ticona Topas is a high purity polymer COC ( cyclic olefin copolymer ) . Compared with most other common polymers used in packaging , COC polymer clear plastic packaging chain comprises two different monomers . Topas is a basic component of ethylene and norbornene. By varying the ratio of norbornene , materials may be varied to meet the needs of particular applications in a wide range. For example , changes in the physical and chemical properties allows for the storage of pharmaceutical products in Topas plastic packaging . In addition to weight reduction , to improve tear resistance and transparency plastic packaging box comparable with the glass , the barrier properties and excellent chemical stability . Also, plastic trays this material is preferably an inert , low absorption rate , the surface is not a heavy metal ions are not released . Topas sterilization process in the design and also has some flexibility. In addition to the pharmaceutical packaging, other uses of such materials include :* Other pharmaceutical and cosmetic blister pack ;* Diagnostic applications , such as microtiter equipment , micro- testing equipment , micro- pump devices , microfluidic molecular , micro mixers, small and micro- tube structure chips ;* Flexible packaging films ;* Paper / paperboard coating ;* clamshell boxes Optical applications , such as lenses , prisms , sensors , fiber and films ;* High -frequency applications* Color printer toner resin application ( powder ) ;Topas development trajectory* 1950s : The initial study of clamshell packaging cyclic olefin polymerization experiments done ;* 1990 : At the time the project began COC polymer research center called Hoechst AG places vac tray ;* 1993 : Japan 's Mitsui Petrochemical Company began research and development cooperation, continuous production process attempts ;* 1995 : The first production line to achieve semi-commercial ;* 1996 : Built located Ticona Topas new production lines , production development process Hoechst norbornene ;* 1998 : choose to establish production bases in Oberhausen;* 2000 : annual output of 30,000 tons of Topas COC production line put into use ;* 2004 : Today , Topas has been used in more than 50 areas of the world ;Prefilled syringe sterile plastic packagingAlthough the glass as a drug packaging materials has existed for a long time , but it is not the only option. A high-tech plastic and the new design is the accuracy , pharmaceutical compatibility and barrier properties of the pharmaceutical packaging field to create a new standard.Schott forma vitrum is the world 's leading packaging manufacturers in the pharmaceutical industry . The company has developed a new generation of high-tech plastics . TopPac brands include a range of syringes and vials plastic packaging box products that combine Schott advantage in the production and design as well as cyclic olefin copolymer from Ticona 's Topas superior performance. In late April of this year , at an international conference on Oberhausen , this new type of polymer and its potential applications to display .The new drug delivery solutions and diagnosticsDr. Klaus Holtzhauer Schott forma vitrum syringe vac tray production manager , explained that container made ??of plastic similar to glass for drug delivery and diagnostics provides a novel solution. They are the precision , drug compatibility and barrier properties of the pharmaceutical packaging field to create a new standard. TopPac transparent plastic container is made ??of borosilicate glass as a good alternative to the pharmaceutical packaging products.Glass injectable drugs is considered good packaging material. Nevertheless , in some cases the glass is not the best choice. For example , there is the risk of fragmentation of the emergency drugs . Market demands are constantly changing , the pharmaceutical industry is continually developing new drugs and, therefore, require a new type of packaging. This is a container for the pharmaceutical industry on the proposed newer, more packaging design stringent requirements. Better compatibility , safe handling of toxic products , active ingredients, longer life , and ease of packaging innovation is a new challenge facing the pharmaceutical packaging industry . Schott has been working closely with pharmaceutical manufacturers to jointly develop a new container industry and to meet the needs of users .Dr. Holtzhauer know that injecting drug market is growing rapidly , in part due to the development of vaccines, drugs, and cosmetics heart disease , medical imaging , self-care and emergency medical services and other fields . As a result, security , user-friendly pharmaceutical packaging demand has greatly increased , especially in the syringe can be plastic packaging design directly applied .Strengths in different areasTopPac in the following areas have many advantages:* Suitable solvent , for example, water for injections and the protein product formulation and packaging boxes wholesale high viscosity.* Meet the direct application of the syringe stringent industry requirements, you can ensure that drugs are clear plastic box not in contact with the environment , but does not react with drugs.* Vials and syringes prepared by the TopPac can be stored for many years in a small size , because this material to water vapor barrier ability is excellent.Syringes models ranging from 1ml ~ 50ml , but within the range of 1ml ~ 10ml of the more obvious advantages . Because of the flexible material is very good , Schott can provide many special properties , such as integrated Luer lock. TopPac product can be applied directly . After the container by injection molding in a clean room technology production , directly in the form of sterile packaging, sterilization and delivered directly to the client's clean room. Complete syringe device includes all the well-known manufacturers of rubber components can provide. Last year , TopPac syringe can be used for emergency treatment was introduced to Europe in heart patients . Specific research began in the late nineties Otto Schott Research Center Marienborn 's .CGMP production in accordance with clear plastic packaging the rulesThis product is currently produced mainly conducted in Switzerland Schott . The company is to produce such products established , and has passed the ISO 9001:2000 and ISO13485 ( medical products ) certified. Syringe production in accordance with cGMP regulations , and meet the standard in Europe, Japan and the U.S. pharmaceutical industry.Holzhauer told us , in order to meet the quality standards of products used directly , they transport from COC polymer to the factory from the moment on the entire production process strictly checked. Transmitted directly to the material of the injection molding apparatus . In the clean room production process, they are all production process parameters for detection and control , including the application of remote control camera on fully automated production lines adjusted to ensure high product quality.TopPac syringe to avoid the cost and time wasting process , such as cleaning and sterilization. The advantage of these costs on the polymer from the Schott developed aseptic production equipment. Since modern production techniques and the corresponding sterile injection molding apparatus , and other conditions of bacterial and particle- forming device is still open after good control . By optimizing the clam shells for sale packing syringes and sterilized by radiation protection devices . Pharmaceutical company responsible for drug solution under sterile conditions to loaded into the syringe , the company received from the company Schott polymer to be used directly TopPac a sterile syringe and sent directly to the factory , so no cleaning or sterilization again.Topas COC tech polymer - another materialIf there is no high-performance polymers , the development of innovative applications in the medical field will not now so compelling. For example , the pharmaceutical packaging plastic trays field is. Packaging must be able to effectively protect drugs meet stringent industry standards and without problems in the drug delivery process, while also cutting costs and plastic packaging customer satisfaction. To meet these demanding requirements , Ticona has developed a special polymer comprising Topas COC.Two different monomersPlastics from Ticona Topas is a high purity polymer COC ( cyclic olefin copolymer ) . Compared with most other common polymers used in packaging , COC polymer chain comprises two different monomers . Topas is clamshell packaging a basic component of ethylene and norbornene. By varying the ratio of norbornene , materials may be varied to meet the needs of particular applications in a wide range. For example , changes in the physical and chemical properties allows for the storage of pharmaceutical products in Topas . In addition to weight reduction , to improve tear resistance and transparency comparable with the glass , the barrier properties and excellent chemical stability . Also, this material is preferably an inert , low absorption rate , the surface is not blister packs packaging a heavy metal ions are not released . Topas sterilization process clear plastic box packaging in the design and also has some flexibility. In addition to the pharmaceutical plastic packaging box packaging, other uses of such materials include :* Other pharmaceutical and cosmetic blister pack ;* Diagnostic applications , such as microtiter equipment , micro- testing equipment , micro- pump devices , microfluidic molecular , micro mixers, small and micro- tube structure chips ;* Flexible packaging films ;* Paper / paperboard coating ;* Optical applications , such as lenses , prisms , sensors , fiber and films ;* High -frequency applications* Color printer toner resin application ( powder ) ;Topas development trajectory* 1950s : The initial study of cyclic olefin polymerization experiments done ;* 1990 : At the time the project began COC polymer research center called Hoechst AG places ;* 1993 : Japan 's Mitsui Petrochemical Company began research and development cooperation, continuous production process attempts ;* plastic box 1995 : The first production line to achieve semi-commercial ;* 1996 : Built located Ticona Topas new production lines , production development process Hoechst norbornene ;* 1998 : choose to establish production bases in Oberhausen;* 2000 : annual output of 30,000 tons of Topas COC production line put into use ;* 2004 : Today , Topas has been used in more than 50 areas of the world ;

Posted by: plasticpackaging at 02:49 AM | Comments (62) | Add Comment
Post contains 2594 words, total size 18 kb.

Infusion of plastic packaging applications

90% of our current infusion using glass bottles , soft plastic packaging actual production is less plastic box than 2 million plastic trays bottles ( bags ) . Currently, most foreign infusion using high quality plastic bottles or plastic bags . With China's accession to WTO, foreign hospitals increased, the number of foreigners living in China have continued to increase greatly increased demand . Developed using the infusion volume was 3.33 per bottle , this is a very large market space. The current global production of 12 billion infusion bottles, China clamshell packaging only 30 clamshell boxes million bottles . Therefore , since 2001, the renovation and expansion , the new infusion packaging production to become " hot spots" , the plastic packaging industry is no exception.Infusion package is divided into plastic bottles and plastic bags . BOPP bottle meteoric rise since 2003 , with the Dongguan Jia Hong Machinery Company to develop domestic BOPP infusion bottle manufacturing equipment , the use blister packs packaging of two-step injection plastic packaging design stretch blow PP bottle production equipment, production 2200-2500 bottles vac tray per hour , by the Pharmaceutical users. And other sterilization, filling equipment packaging design matching , BOPP infusion plastic packaging bottles showing growth , changing bottles domination . Expected to next year already and in packaging boxes wholesale the construction of BOPP bottle production capacity ( there are 17 to introduce 20 plastic bottle production line ) will exceed one billion bottles , will together form a medicinal liquid packaging diversity and glass bottles, soft plastic bags.Soft plastic , the According to incomplete statistics , at present, a total plastic clear plastic packaging packaging box of 21 enterprises to introduce or enter into soft plastic packaging production line 25 , soft plastic bag production capacity will reach 300 million bags.In summary , the current project is being launched or prepared on plastic packaging enterprises should seriously consider the implementation of access to clear plastic box packaging medicine packaging system for packaging materials quality , technology has strict requirements . But ( pharmaceutical plastic , plastic packaging materials and containers infusion standards ) has not been introduced, in terms of quality assurance to the user to select the package materials create difficulties . Prone to disorderly competition . Therefore, we must consider carefully to avoid economic losses.Infusion of plastic packaging applications90% of our current infusion using glass bottles , soft plastic packaging actual production is less than 2 million bottles ( bags ) . Currently, most foreign infusion plastic packaging box using high quality plastic bottles or plastic bags . With China's accession to WTO, foreign hospitals increased, the number of foreigners living in clam shells for sale China have continued to increase greatly increased demand . Developed using the infusion volume was 3.33 packaging design per bottle , this is a very large market space. The current global production of 12 billion infusion bottles, China only 30 million bottles . plastic packaging design Therefore , since 2001, the renovation and expansion , the new infusion packaging production to become " hot spots" , the plastic clear plastic packaging packaging industry is no exception.Infusion package is divided into plastic bottles and plastic bags clear plastic box . BOPP bottle meteoric rise since 2003 , with the Dongguan Jia Hong plastic trays Machinery Company to develop domestic BOPP infusion bottle manufacturing equipment , the use of two-step injection stretch blow PP bottle production equipment, production 2200-2500 bottles per hour , by the Pharmaceutical users. And other sterilization, filling equipment matching , BOPP infusion bottles showing growth , changing bottles domination . Expected to next year already and in the construction of BOPP bottle production capacity ( there are 17 to introduce 20 plastic vac tray bottle production line ) will exceed one billion bottles , will together form a medicinal liquid packaging diversity and glass bottles, soft plastic bags.Soft plastic , the According to incomplete statistics , at present, a total of 21 enterprises to introduce or enter into soft plastic packaging clamshell packaging production line 25 , soft plastic bag production capacity will reach 300 million bags.In summary , the current project is being launched or prepared on plastic packaging enterprises should seriously consider the implementation of access to medicine packaging plastic packaging box system for packaging materials quality , technology has strict requirements . But ( pharmaceutical plastic , plastic packaging materials and containers infusion standards plastic packaging ) has not been introduced, in terms of quality assurance to the user to select the package materials plastic box create difficulties . Prone to disorderly competition . Therefore, we must consider carefully to avoid economic losses.

Posted by: plasticpackaging at 02:48 AM | Comments (19) | Add Comment
Post contains 782 words, total size 6 kb.

<< Page 2 of 4 >>
7528kb generated in CPU 1.862, elapsed 2.5025 seconds.
47 queries taking 1.146 seconds, 9801 records returned.
Powered by Minx 1.1.6c-pink.

Search Thingy



Recent Comments

Categories

Archives

Blogroll

Sample link

Monthly Traffic

  • Pages: 276
  • Files: 9
  • Bytes: 260.0M
  • CPU Time: 3:15
  • Queries: 12116

Content

  • Posts: 75
  • Comments: 19544

Feeds


RSS 2.0 Atom 1.0